MARTIN Mac Quantum Profile

Lyre LED asservie, zoom 12-36°, 6500°K

Descriptions détaillées

This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air.

With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology.
  • First real alternative to a 700/800 watt HID fixture
  • Flat field, crisp image, high contrast
  • Full feature set including CMY color mixing and 1:3 zoom
  • Pure white 6500 K LEDs combined with fast, responsive and even CMY color mixing
  • Very low weight and compact design
  • Consistent photometric performance via LED technology

Dynamic Effects
  • Color mixing: CMY, independently variable 0 - 100%
  • Color wheel: 6 color filters plus open
  • Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake
  • Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake
  • Beam effects: Rotating three-facet prism
  • Zoom: 12° - 36° (1:3)
  • Pan and tilt speed: Adjustable via onboard control panel and DMX
  • Focus: Motorized, with zoom-focus tracking
  • Iris: 0 - 100%, pulse effects
  • Shutter effect: Electronic, with variable speed regular and random strobe
  • Electronic dimming: Four dimming curve options
  • Pan: 540°
  • Tilt: 268°
Control and Programming
  • Control system: DMX
  • RDM: Implemented
  • Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt
  • DMX channels: 19/27
  • Setting and addressing: Control panel with backlit graphic display
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
  • Transceiver: RS-485
  • Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box
Optics
  • Light source: 475 W LED engine
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
  • *Figure obtained under manufacturer´s test conditions
Construction
  • Color: Black
  • Housing: High-impact flame-retardant thermoplastic
  • Protection rating: IP20
Installation
  • Mounting points: 4 pairs of quarter-turn locks
  • Location: Indoor use only, must be fastened to surface or structure
  • Orientation: Any
  • Minimum distance to combustible materials: 0.2 m
  • Minimum distance to illuminated surfaces: 2.0 m
Connections
  • AC power input: Neutrik PowerCon
  • DMX and RDM data in/out: 5-pin locking XLR
Electrical
  • AC power: 120-240 V nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch mode
  • Maximum total power consumption: 750 W
  • Typical half-cycle RMS inrush current: 10.3 A
  • Typical power consumption, all effects static, zero light output: Approx. 50 W
  • Maximum total power consumption: 750 W
  • Typical half-cycle RMS inrush current: 10.3 A
Typical Power and Current
  • 120 V, 60 Hz: 4.8 A, 576 W, PF 0.999
  • 208 V, 60 Hz: 2.8 A, 568 W, PF 0.991
  • 230 V, 50 Hz: 2.5 A, 565 W, PF 0.988
  • 240 V, 50 Hz: 2.4 A, 565 W, PF 0.988
  • Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
  • Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
  • Maximum ambient temperature (Ta max.): 40° C
  • Minimum ambient temperature (Ta min.): 5° C
  • Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
Approvals
  • EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
  • EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
  • US safety (pending): UL 1573
  • US EMC: FCC Part 15 Class A
  • Canadian safety (pending): CSA C22.2 No. E598-2-17 (CSA E60598-1)
  • Canadian EMC: ICES-003 Class A
  • Australia/NZ: C-TICK N4241

Ce matériel en situation